For Excalibur (body mount version)




  • Light and strong

  • Stress relief tube at rear of handle

  • Powder coated aluminum

  • 90 degree cuff (curved cuffs cause your arm to want to walk up and out)

  • Velcro strap is included

  • Carbon Fiber mid tube (image shows where the tube will be). We are building stock at the moment

  • The mid Carbon Fiber tube is fastened with a stainless screw for regidity.

  • The coil end of the mid tube has side holes for the spring plunger in YOUR lower shaft to snap into.

  • 1 year warranty - We strongly recommend sealing all openings with black electrical tape (supplied) so sand will stay out of the joint.

  • Warranty does not cover frozen tubes that were not protected with tape

  • 18" over all length for the upper shaft (great for fitting in your suit case)

  • 18" mid carbon fiber tube length with 4 holes on the lower end for adjustment of your lower shaft

  • Included: Strap on cuff, a roll of electrical tape and a Pair of gloves.

    Tip: With this or ANY handle, seal the joints with black electrical tape to keep sand out. Once you get sand in you may never get the lower shaft out again!

Contact us for details


OWL Engineering
11542 Timken Avenue
Warren, Michigan 48089 - USA

    Email: info@owl-engineering.com
Telephone: 1 586 755 5821
Fax: 1 586 755 6179

Made in the USA